NA1006 is a non-asbestos jointing-sheet material produced from aramid fibers, bonded with Nitrile rubber (NBR). It is manufactured through the hot calender process under rigorous quality control standards that are registered under ISO 9001 certification.
NA1006 is suitable for water, gases, oils, and acids in mild service.
Temperature (ºC) | Continuous Service: 220 |
Maximum Service: 300 | |
Pressure (bar) | Maximum Service: 80 |
Availability (in mm) | 1.500 x 1.600 |
1.500 x 3.200 | |
Thickness (in mm) | 0.8/1.0/1.6/2.0 and 3.0 |
Color | Green |
Typical Physical Properties: | ||
---|---|---|
Density - ASTM F1315 | app. 1,69 -1,90 g/cm3 | |
Compressibility - ASTM F36 | 7-17% | |
Recovery - ASTM F36 | 50% | |
Ignition loss - ASTM F495 | 35% | |
Tensile Strength - ASTM F152 | 1300 psi | |
Thickness Increase - ASTM F146 - after 5hr | ||
ASTM Oil IRM 903 Nr.3 @ 150ºC | 15% | |
Fuel B, @ 25ºC | 10% | |
Weight Increase - ASTM F146 - after 5hr | ||
ASTM Oil IRM 903 Nr.3 @ 150ºC | 15% | |
Fuel B, @ 25ºC | 15% | |
Torque Retention - DIN 52913 | 2 N/mm2 |
TEADIT® Deutschland GmbH
Schanzenstraße 35, 51063 Köln, Germany
Phone: +49 (0)221/922 342-0
Fax: +49 (0)221/922 342-22
TEADIT® International Produktions GmbH
Rosenheimer Str. 10, A-6330 Kufstein Austria
Phone: +43-5372-64020-0
Fax: +43-5372-64020-20
2016 © Teadit | All Material Copyright are reserved.
This website uses modern technologies such as JavaScript, CSS, HTML5 and WebFonts; because of this, it is best viewed in modern browsers.
We recommend to use Google Chrome as your primary browser for this website.