TEADIT style NA1005 is a compressed non-asbestos jointing-sheet material produced from Aramid fibres, bonded with Nitrile Rubber (NBR). It is being manufactured by means of a hot calender process under rigorous quality control standards which are registered under ISO 9001 certification.
Please note: the colour of the actual product might vary from the above image on this data-sheet.
Style NA1005 is indicated for air, brine, water, low pressure steam, organic and weak inorganic acids, diluted and concentrated alkalis, petroleum derivatives, synthetic and vegetable oils, aliphatic and chlorinated solvents, refrigerants, gases and chemical products in general.
| Temperature (ºC) | Continuous Service: 240 |
| Maximum Service: 400 | |
| Pressure (bar) | Continuous Service: 50 |
| Maximum Service: 110 |
| Availability (in mm) | 1.500 x 1.600 |
| 1.500 x 3.200 | |
| Thickness (in mm) | 0.5/1.0/1.5/2.0/2.5 and 3.0 |
| Color | Green |
| Typical Physical Properties: | ||
|---|---|---|
| Density | app. 1,75 g/cm3 | |
| Compressibility - F36 | 7-17% | |
| Recovery - ASTM F36 | 45% | |
| Tensile Strength, Transverse - F152 | 11,5 N/mm2 | |
| Residual Stress - DIN 52913 | 28 N/mm2 | |
| Creep Relaxation - F38 | 25% | |
| Sealability at 1000 psi - F37 A | 0,25 ml/h | |
| Thickness Increase - ASTM F146 - after 5hr | ||
| ASTM Oil Nr.3 @ 150ºC | 12% | |
| Fuel B, @ +21-29ºC | 10% | |
| Weight Increase - ASTM F146 - after 5hr | ||
| ASTM Oil Nr.3 @ 150ºC | 15% | |
| Fuel B, @ 21-29ºC | 15% | |
TEADIT® Deutschland GmbH
Schanzenstraße 35, 51063 Köln, Germany
Phone: +49 (0)221/922 342-0
Fax: +49 (0)221/922 342-22
TEADIT® International Produktions GmbH
Rosenheimer Str. 10, A-6330 Kufstein Austria
Phone: +43-5372-64020-0
Fax: +43-5372-64020-20
2016 © Teadit | All Material Copyright are reserved.
This website uses modern technologies such as JavaScript, CSS, HTML5 and WebFonts; because of this, it is best viewed in modern browsers.
We recommend to use Google Chrome as your primary browser for this website.
