Non-Asbestos Jointing Sheet with Aramid Fibers and NBR Rubber

Desciption and Applications

TEADIT style NA1002 is a compressed non-asbestos jointing- sheet material produced from Aramid fibres, bonded with Nitrile rubber (NBR). It is being manufactured by means of a hot calender process under rigorous quality control standards which are registered under ISO 9001 certification.Style NA1002 is indicated for sealing petroleum derivatives, water, saturated steam, gases and chemical products in general. Exceptional performance in connection with gas.


  • TA-Luft
  • KTW
  • ABS Certificate
  • WRAS
  • Blow-Out-Test VDI 2200
  • BAM

Service Limits

Temperature (ºC) Continuous Service: 260
Maximum Service: 400
Pressure (bar) Continuous Service: 80
Maximum Service: 110
Availability (in mm) 1.500 x 1.600
1.500 x 3.200
Thickness (in mm) 1.0/1.5/2.0/2.5 and 3.0
Color Green
Typical Physical Properties:
Density app. 1,95 g/cm3
Compressibility - F36 10%
Recovery - ASTM F36 60%
Tensile Strength, Transverse - F152 13 N/mm2
Thickness Increase - ASTM F146 - after 5hr
ASTM Oil Nr.3 @ 150ºC 8%
Fuel B, @ +21-29ºC 7%
Weight Increase - ASTM F146 - after 5hr
ASTM Oil Nr.3 @ 150ºC 11%
Fuel B, @ 21-29ºC 9%





TEADIT® Deutschland GmbH

Schanzenstraße 35, 51063 Köln, Germany

Phone: +49 (0)221/922 342-0

Fax: +49 (0)221/922 342-22

TEADIT® International Produktions GmbH

Rosenheimer Str. 10, A-6330 Kufstein Austria

Phone: +43-5372-64020-0

Fax: +43-5372-64020-20


2016 © Teadit | All Material Copyright are reserved.


This website uses modern technologies such as JavaScript, CSS, HTML5 and WebFonts; because of this, it is best viewed in modern browsers.

We recommend to use Google Chrome as your primary browser for this website.