GR 1520

Graphite Sheet with Plain Metal Insert SS 316


Because of its specific structure expanded graphite sheets are particularly suited for applications with extremely high or low temperatures, with highly corrosive and aggressive media, for sensitive flange materials (i.e. enamel, glass, plastic) and for gas and steam applications.

Because graphite sheets are fragile and therefore difficult to handle, we recommend the use of styles with metal insertions. All styles are available with or without impregnation.



TEADIT expanded graphite sheets are produced from pure, expanded flexible graphite and do not contain any other fibers or filler materials.

Please note: the colour of the actual product might vary from the above image on this data-sheet.


TEADIT expanded flexible graphite sheets are universally applicable for gases and fluids. They are chemically resistant against most media, have excellent thermal conductivity, can be stored indefinitely, do not need anti-stick coating and are extremely resistant to temperature cycles.

Service Limits

Temperature ºC Minimum Service: -240
Maximum Service: 450
Steam up to 650
in non-oxidizing atmosphere up to 800
Pressure bar 70
Availability (in mm) 1.000 x 1.000
Thickness (in mm) 1.0/1.5/2.0 and 3.0

Typical Physical Properties:
Density (graphite) 1 g/cm³
Compressibility 40 - 50%
Recovery 10-25%
Carbon Content ≥98%
Chloride Content < 30ppm
Sulfur Content ≤1000ppm
Residual Stress >45 N/mm2
pH Rate 0-14

Datasheet GR 1520






TEADIT® Deutschland GmbH

Schanzenstraße 35, 51063 Köln, Germany

Phone: +49 (0)221/922 342-0

Fax: +49 (0)221/922 342-22

TEADIT® International Produktions GmbH

Rosenheimer Str. 10, A-6330 Kufstein Austria

Phone: +43-5372-64020-0

Fax: +43-5372-64020-20


2016 © Teadit | All Material Copyright are reserved.


This website uses modern technologies such as JavaScript, CSS, HTML5 and WebFonts; because of this, it is best viewed in modern browsers.

We recommend to use Google Chrome as your primary browser for this website.